Welcome to the project section of the site. I enjoy wrenching on just about anything as I mentioned in my About Me section. At this time the majority of the work shown has be done on my 1998 Jeep Wrangler that I have built from the ground up over the past few years. I do the work myself, although on occasion as with any project sometimes help from friends is needed. I will be adding new write-ups as often as I can complete them.
I would like to add a few things, first, is a safety warning. Any time working on an automotive project or any project for that matter work safety and with the proper protection (ears, eyes etc…) I have had my fair share of accidents, some very serious that could have been avoided.
Next is a quick note about taking on a new project big or small, make sure you know what you’re getting yourself into. Fully read the write-up, review the components you will need and might need if things go sideways, also have a good understanding of the tools needed and how to use them.
(The write up’s provided here are the processes I used to modify my vehicle, I will try my hardest to be as detailed as I can, but if you find a step that I missed or a helpful tip please point it out so I can fix the issue, add to the post and bring a better write-up’s to anyone looking)
You must be logged in to post a comment.